1998 Mitsubishi Canter Specifications

The Mitsubishi Canter is a small, four-door sedan that was produced by Mitsubishi Motors from 1998 to 2000. It’s the third generation of the Mitsubishi Lancer and was sold as the Nissan Tiida in Japan.

The mitsubishi fuso canter specifications is a 1998 Mitsubishi Canter that has been in service since it was released. The car features a 3.0 litre turbo diesel engine with an output of 150 horsepower and a top speed of 120 km/h.

This Video Should Help:

1998 Mitsubishi Canter Specifications

Mitsubishi Canter 1998 specifications ufffd Take inspiration from these keywords: 2007 mitsubishi fuso canter specifications, 2004 mitsubishi canter specifications, 2003 mitsubishi canter specifications, 2002 mitsubishi canter specifications.

Introduction

The Mitsubishi Canter is a medium duty truck produced by the Japanese automaker Mitsubishi Motors. It was originally introduced in 1968, and has been built in several different configurations over the years. The most recent version of the Canter was introduced in 2007, and it is still in production today.

2007 Mitsubishi Canter Specifications:

The 2007 Mitsubishi Canter is available in two different wheelbase options: 3100 mm (122.0 inches) and 3400 mm (133.9 inches). It has a maximum payload capacity of 1814 kg (4000 lb), and a gross vehicle weight rating of 3048 kg (6730 lb). The engine is a 4 cylinder diesel with 100 hp @ 3000 rpm. It has a manual 5-speed transmission, and rear-wheel drive. The dimensions of the truck are 5085 mm (200.4 inches) long, 1775 mm (69.9 inches) wide, and 2545 mm (100.2 inches) tall.

2004 Mitsubishi Canter Specifications:

The 2004 Mitsubishi Canter is available in three different wheelbase options: 2800 mm (110.2 inches), 3100 mm (122 inches), and 3400 mm(133.8inches). It has a maximum payload capacityof 1605kg(3532lb),andagrossvehicleweightratingof2976kg(6560lb). The [email protected] Mitsubishi Canter Specifications

The Mitsubishi Canter is a light commercial vehicle produced by the Japanese manufacturer Mitsubishi Motors since 1963. It has been built as a truck, cabover van and cabover truck, and in various body styles. The Canter was originally introduced as the Colt T120A in 1963, and was renamed to the T200 in 1967 before being renamed again to the Canter in 1971.

The first generation Canter was available with either a 1.5-litre or 2.0-litre petrol engine, and later versions came with diesel engines as well. In Japan, it was also available with 4WD from 1980 onwards. Export markets such as Australia received different names for the same model; for example, it was known as the Mighty Max in North America and as the L300/L400/Spacegear in other markets such as Europe and Asia Pacific region.

The second generation saw a new range of diesels added, along with 4WD versions for export markets only. This generation also spawned the Delica line of multi-purpose vehicles (MPVs).

Third generation models were launched in 1996; they were larger than their predecessors and featured improved engines and styling. A facelift occurred in 1999, at which time a new 3-litre turbodiesel engine became available. Fourth generation models were introduced in 2005; they featured an all-new chassis and body style but retained many mechanical components from previous generations including engines and transmissions. These Canters are still currently being produced today (as of 2019).

Mitsubishi Canter Dimensions

The Mitsubishi Canter is a light commercial vehicle produced by the Japanese manufacturer Mitsubishi Motors since 1963. It comes in many different variants and body styles, and it has been built in many countries around the world. The Canter is now in its eighth generation.

The first-generation Canter was introduced in 1963 as a replacement for the Mitsubishi Colt T60 series truck. It was available with a 1.5-litre petrol engine or a 2.0-litre diesel engine. The second generation, introduced in 1967, was available with either a 2.0-litre petrol engine or a 2.4-litre diesel engine.

The third-generation Canter, introduced in 1971, was available with either a 2.6-litre petrol engine or a 3.0-litre diesel engine. This was the first time that the Canter was available with four-wheel drive.

The fourth generation of the Canter, introduced in 1979, saw the introduction of turbocharged engines, both petrol and diesel. The fifth generation of the Canter, introduced in 1985, saw further refinements to the turbocharged engines and also the introduction of intercoolers on some models.

The sixth generation of the Canter, introduced in 1993, saw significant changes to the styling of the truck as well as improvements to performance and fuel economy thanks to advances in technology such as electronic fuel injection and catalytic converters .

In 1999 , seventh generation appeared , which until 2006 has not changed significantly . Only then he underwent surgery facelift , which gave him a new look more modern headlights , bonnet , grille and front bumper . On offer were versions with single row cabin for two people ( standard ) or double -row cabin for three crew members ( Long ). Underneath there were several types of drive : 4 ufffd 2 ( rear -wheel drive ), 6 ufffd 2 ( rear axle steering ) or 6 ufffd 4 ( all – wheel drive ). Engine options included units working on gasoline or liquefied petroleum gas : 3 liters producing 95 hp D 2300 MIVEC turbodiesel connected to 5 ufffd speed manual transmission ; gasoline engines were 4G64 SOHC 16V 90 hp 4300 cc coupled with manual gearbox 5 gears or automatic transmission Aisin AW40 ufffd 4F40E 4 ufffd speed; LPG variants had G63B SOHC 8v 66 hp 3300 cc mated to manual gearbox 5 gears . In Japan he sold under names Strada TR150/250/350/450L depending on payload capacity from 1250 kg up to 4501 kg .

Mitsubishi Canter Weight

The Mitsubishi Canter is a light commercial vehicle produced by the Japanese automaker Mitsubishi Motors. It was originally introduced in 1963, and has been built in several different configurations over the years. The most recent version of the Canter was introduced in 2007, and is available in both 3-ton and 4-ton variants.

One of the key features of the Canter is its weight. Thanks to its light construction, it can carry up to 3 tons of payload without any problems. This makes it an ideal vehicle for businesses that need to transport large loads but don’t want to invest in a heavier truck.

Another advantage of the Canter’s light weight is that it gives the vehicle excellent fuel economy. This is especially true for the diesel-powered models, which are some of the most efficient trucks on the market. If you’re looking for a cost-effective way to move goods around, then the Mitsubishi Canter should definitely be on your list.

Mitsubishi Canter Engine

The Mitsubishi Canter is a light commercial vehicle produced by the Japanese automaker Mitsubishi. It was originally introduced in 1963, and has been built in numerous different configurations over the years. The most recent incarnation of the Canter was introduced in 2007, and is still in production today.

Canters are available in a wide range of body styles, including panel vans, pick-ups, tippers and minibuses. They are also available with a variety of different engine options, including petrol, diesel and LPG models.

The current model of the Canter is powered by a 3.0 litre turbocharged diesel engine, which produces around 177 horsepower. This gives the Canter a top speed of around 130 km/h (80 mph), and a 0-60 time of around 13 seconds.

In terms of size, the Canter measures 5265 mm long, 1895 mm wide and 1810 mm tall. It has a kerb weight of around 2200 kg (4850 lb), depending on the specific model and configuration.

Mitsubishi Canter Transmission

The Mitsubishi Canter is a popular light commercial vehicle that has been in production since 1963. It is available in a wide range of body styles and engine configurations to suit the needs of different businesses. The Canter is known for its reliability and low running costs, and has become one of the best-selling trucks in Japan.

The standard transmission on the Canter is a 5-speed manual, with an optional 4-speed automatic available on some models. The Canter can also be fitted with a 6-speed manual or an 8-speed automatic transmission, depending on the engine specification. All Canters come with rear-wheel drive as standard, but four-wheel drive models are available on certain versions.

The payload capacity of the Canter varies from 1 tonne to 3.5 tonnes, depending on the model and configuration. The engine options include petrol, diesel and LPG variants, with power outputs ranging from 95 hp to 175 hp. There are also several different wheelbase options available, from 2200 mm to 3000 mm.

Whether you need a light commercial vehicle for city driving or something more powerful for off-road work, the Mitsubishi Canter has a model to suit your needs. With its strong reputation for reliability and low running costs, the Canter is sure to keep your business moving forwards.

Mitsubishi Canter Brakes

The Mitsubishi Canter is a Japanese light commercial vehicle manufactured by Mitsubishi Fuso Truck and Bus Corporation. It has been in production since 1963 and has undergone several generational changes. The latest model, the Canter Guts, was introduced in 2016.

The Canter is available in a wide range of configurations including cab-over, flatbed, tipper, and refrigerated van. It is powered by a range of diesel engines ranging from 2.3-liters to 4.9-liters. The Canter comes with standard features such as power steering, air conditioning, and ABS brakes. Optional features include traction control, stability control, and a GPS navigation system.

The Mitsubishi Canter is built for durability and reliability. It has a strong frame and suspension system that can handle heavy loads. The brakes are designed for fade-free performance even under heavy use. The engine is powerful and efficient making it ideal for long distance hauling or city driving.

Mitsubishi Canter Safety

The Mitsubishi Canter is a popular light commercial vehicle that’s known for its safety features. It comes with standard driver and passenger airbags, as well as side curtain airbags to protect occupants in the event of a side impact collision. The Canter also has a reinforced cabin structure that helps to absorb impact energy in the event of a frontal collision. And if you’re worried about rollovers, the Canter comes with standard stability control and rollover protection bars. All of these safety features make the Mitsubishi Canter a great choice for businesses that need a safe and reliable workhorse.

The “2006 mitsubishi canter specifications” is a car that was released in 1998. It has a top speed of 138 mph, and it’s engine produces 155 horsepower.

External References-

https://en.wikipedia.org/wiki/Mitsubishi_Fuso_Canter

Scroll to Top